ZyXEL Communications VES-1000 Series, User Manual, Page: 157 / 227

VES-1000 Series Ethernet Switch
Firmware and Configuration File Maintenance 21-3
6.
Use “get” to transfer files from the VES to the computer, for example, “get rom-0 config.rom” transfers
the configuration file on the VES to your computer and renames it “config.rom”. See earlier in this
chapter for more information on filename conventions.
7.
Enter “quit” to exit the ftp prompt.
21.2.3 Example of FTP Commands from the Command Line
Figure 21-2 FTP Session Example
21.2.4 GUI-based FTP Clients
The following table describes some of the commands that you may see in GUI-based FTP clients.
Table 21-2 General Commands for GUI-based FTP Clients
COMMAND DESCRIPTION
Host Address Enter the address of the host server.
Login Type Anonymous.
This is when a user I.D. and password is automatically supplied to the
server for anonymous access. Anonymous logins will work only if your
ISP or service administrator has enabled this option.
Normal.
The server requires a unique User ID and Password to login.
Transfer Type Transfer files in either ASCII (plain text format) or in binary mode.
Initial Remote Directory Specify the default remote directory (path).
Initial Local Directory Specify the default local directory (path).
21.2.5 TFTP and FTP over WAN Restrictions
TFTP and FTP over WAN will not work when:
•
Telnet service is disabled in menu 24.11.
331 Enter PASS command
Password:
230 Logged in
ftp> bin
200 Type I OK
ftp> get rom-0 zyxel.rom
200 Port command okay
150 Opening data connection for STOR ras
226 File received OK
ftp: 16384 bytes sent in 1.10Seconds
297.89Kbytes/sec.
ftp> quit