ZyXEL Communications VES-1000 Series, User Manual, Page: 113 / 227

VES-1000 Series Ethernet Switch
General, Switch and IP Setup 15-1
Chapter 15
General, Switch and IP Setup
This chapter describes SMT menus 1, 2 and 3.
15.1 General Setup
Use this menu to enter the administrative information for VES.
From the main menu enter 1 to bring up Menu 1 – General Setup .
Figure 15-1 Menu 1 – General Setup
The Menu 1 — General Setup fields are explained in the next table.
Table 15-1 General Setup Fields
FIELD DESCRIPTION EXAMPLE
System Name Choose a descriptive name for identification purposes. This name can be up
to 30 alphanumeric characters long. Spaces are not allowed, but dashes “-”
and underscores "_" are accepted. This name can be retrieved remotely via
SNMP and will be displayed up to the first 9 characters at the prompt in the
Command Mode. VDSL_1
Note: Once you have configured the System Name, you can see it displayed (up to the first nine characters) in the
main menu within brackets next to " VES-1012 Main Menu”.
Location
(optional) Enter the geographic location (up to 31 characters) of your VES . Hsinchu
Contact Person's
Name (optional) Enter the name (up to 30 characters) of the person in charge of this VES. JohnDoe
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to save your
configuration, or press [ESC] at any time to cancel.
15.2 Switch Setup
Enter 2 from the main menu to display Menu 2 – Switch Setup .
Menu 1 - General Setup
System Name = ?
Location =
Contact Person's Name =