ZyXEL Communications VES-1000 Series, User Manual, Page: 133 / 227

VES-1000 Series Ethernet Switch
VLAN Setup 18-1
Chapter 18
VLAN Setup
This chapter shows you how to set up VLAN on the switch using SMT menu 17.
18.1 Introduction
To activate IEEE 802.1Q on the VES, you must enable it for the switch in menu 2, the port in menu 6 port
submenu(s) and menu 17 VLAN setup. Menu 17 allows you to enable GVRP on the switch and configure static
VLANs. See elsewhere in this manual for VLAN configuration using menus 2 and 6.
Figure 18-1 Main Setup Menu
18.2 VLAN Setup Configuration
Select
802.1Q
as the VLAN Type in Menu 2 — Switch Setup .
Enter 17 from the main menu to go to Menu 17 — VLAN Setup .
This menu is not available ( Menu 17 – VLAN Setup (N/A) ) if you have not selected 802.1Q as the VLAN type in
Menu 2 – Switch Setup.
Figure 18-2 Menu 17 VLAN Setup
Menu 17 - VLAN Setup
GVRP= Enable
Management VLAN ID= 1
Edit 802.1Q VLAN Static Entry= No
Press ENTER to Confirm or ESC to Cancel:
Copyright (c) 1994 - 2002 ZyXEL Communications Corp.
VES-1012 Main Menu (VDSL_1)
Getting Started Advanced Management
1. General Setup
2. Switch Setup 22. SNMP Configuration
3. IP Setup 23. System Password
24. System Maintenance
6. Port Setup
Advanced Applications
12. Static Routing Setup
17. VLAN Setup
99. Exit
Enter Menu Selection Number: