ZyXEL Communications VES-1000 Series, User Manual, Page: 171 / 227

VES-1000 Series Ethernet Switch
System Maintenance 2 22-3
Figure 22-3 Menu 24.11 – Remote Management Control
Table 22-2 Menu 24.11 – Remote Management Control
FIELD DESCRIPTION EXAMPLE
TELNET/FTP/Web
/ICMP Service Press the [SPACE BAR] to select Enable and then press [ENTER] to allow
remote Telnet, FTP and/or ICMP service.
Enable
Server Port Many residential broadband ISP accounts do not allow you to run any server
processes (such as an FTP server) from your location. If you wish to run such
a server from your location, you must change the default service port number.
Type in the new service port number here that corresponds to the new port
number you configured on the server. 23
Edit Secured
Clients Secured clients are trusted computers that may access the defined services
on the VES. Press [SPACE BAR] once to select
Yes and then press [ENTER]
to go to SMT Menu 24.1.1 – Secured Client Sets .
No
Once you have filled in this menu, press [ENTER] at the message "Press ENTER to Confirm or ESC to Cancel" to
save your configuration, or press [ESC] to cancel.
22.3.1 Secured Client Sets
Press [SPACE BAR] once in the Edit Secured Clients field (menu 24.11) to select Yes and then press [ENTER]
to go to SMT Menu 24.1.1 – Secured Client Sets . This is a read-only menu.
Menu 24.11 - Remote Management Control
Service Access:
TELNET service= Enable
Server Port= 23
FTP Service= Enable
Server Port= 21
Web Service= Enable
Server Port= 80
ICMP Service= Enable
Edit Secured Clients= No
Press ENTER to Confirm or ESC to Cancel: