ZyXEL Communications VES-1000 Series, User Manual, Page: 167 / 227

VES-1000 Series Ethernet Switch
Firmware and Configuration File Maintenance 21-13
2.
After the "Starting Xmodem upload" message appears, activate the Xmodem protocol on your computer.
Follow the procedure as shown previously for the HyperTerminal program. The procedure for other serial
communications programs should be similar.
3.
Enter “atgo” to restart the VES.
21.4.11 Example Xmodem Configuration Upload Using
HyperTerminal
Click Transfer , then Send File to display the following screen.
Figure 21-19 Example Xmodem Upload
After the configuration upload process has completed, restart the VES by entering “atgo”.
21.5 Upload the Default Configuration File
You can upload the default configuration file using the “sys loadrom” line command:
Figure 21-20 Upload Default Configuration File
The console speed changes to 9600 bps, the IP address to 192.168.1.1, the subnet mask to 255.255.255.0 and all
custom settings revert to the default value. Enter “y” and then
[ENTER]
to begin uploading the default
configuration file. You see the next screen.
Type the configuration file’s
location, or click
Browse to search
for it.
Choose the Xmodem protocol.
Then click Send .
ras> sys loadrom
Default Romfile reset...
System Restart (Console speed will be changed to 9600 bps)
IP will be changed to 192.168.1.1
IP mask will be changed to 255.255.255.0
All previous setting will be set to the default value.
Would you like to proceed?(y/n)