Home
/
ZyXEL Communications
/
P-2602HWLNI
/
User Manual

ZyXEL Communications P-2602HWLNI, User Manual, Page: 118 / 496

Share

Page: 118 / 496

ZyXEL Communications P-2602HWLNI User Manual Download Page 118

Chapter 8 LAN Setup

P-2602HWLNI User’s Guide

118

8.1.2 DHCP Setup

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual
clients to obtain TCP/IP configuration at start-up from a server. You can configure the ZyXEL
Device as a DHCP server or disable it. When configured as a server, the ZyXEL Device
provides the TCP/IP configuration for the clients. If you turn DHCP service off, you must
have another DHCP server on your LAN, or else the computer must be manually configured.

8.1.2.1 IP Pool Setup

The ZyXEL Device is pre-configured with a pool of IP addresses for the DHCP clients (DHCP
Pool). See the product specifications in the appendices. Do not assign static IP addresses from
the DHCP pool to your LAN computers.

8.2 DNS Server Addresses

DNS (Domain Name System) maps a domain name to its corresponding IP address and vice
versa. The DNS server is extremely important because without it, you must know the IP
address of a computer before you can access it. The DNS server addresses you enter when you
set up DHCP are passed to the client machines along with the assigned IP address and subnet
mask.
There are two ways that an ISP disseminates the DNS server addresses.

• The ISP tells you the DNS server addresses, usually in the form of an information sheet,

when you sign up. If your ISP gives you DNS server addresses, enter them in the DNS
Server fields in the

LAN Setup

screen.

• Some ISPs choose to disseminate the DNS server addresses using the DNS server

extensions of IPCP (IP Control Protocol) after the connection is up. If your ISP did not
give you explicit DNS servers, chances are the DNS servers are conveyed through IPCP
negotiation. The ZyXEL Device supports the IPCP DNS server extensions through the
DNS proxy feature.
The ZyXEL Device acts as a DNS proxy when the

Primary

and

Secondary

DNS Server

fields are left blank in the

LAN Setup

screen.

Please note that DNS proxy works only when the ISP uses the IPCP DNS server
extensions. It does not mean you can leave the DNS servers out of the DHCP setup under
all circumstances. If your ISP gives you explicit DNS servers, make sure that you enter
their IP addresses in the

LAN Setup

screen.

8.3 LAN TCP/IP

The ZyXEL Device has built-in DHCP server capability that assigns IP addresses and DNS
servers to systems that support DHCP client capability.

8.3.1 IP Address and Subnet Mask

Similar to the way houses on a street share a common street name, so too do computers on a
LAN share one common network number.

«
...
116
117
118
119
120
...
»

Summary of Contents for P-2602HWLNI

















































































































































































































































































































































































































































































































Reviews:

No comments