ZyXEL Communications OMC-2301, User Manual

Page: 155 / 224

Chapter 19 Introducing the Commands
OMC-2301 User’s Guide
155
19.10.2 Enable Mode
The following table describes the commands available in Enable mode.
vlan-profile
Displays the VLAN profile summary table.
ssh <1|2>
<[user@]dest-
ip> [commands]
Connects to an SSH server with the specified SSH
version.
traceroute <ip|host-name>
[out-of-band]
[ttl <1-255> ]
[wait <1-60>]
[queries <1-
10>]
Determines the path a packet takes to a device.
help
Displays the command help information.
Table 48 Command Summary: User Mode (continued)
COMMAND DESCRIPTION
Table 49 Command Summary: Enable Mode
COMMAND DESCRIPTION
baudrate <1|2|3|4|5>
Changes the console port speed.
Choices are 1 (9600), 2 (19200),
3(38400), 4 (57600) and 5 (115200).
boot config <index>
Restarts the system.
clear epon-counter <port-number>
Resets the EPON counters on a port.
A port number contains three or four
digits, such as 101 or 1402. The digit(s)
before 0 in a port number corresponds to
the card slot on the OLT, and the last digit
denotes the port type (1 for PON port
and 2 for uplink port).
epon-daily-counter <port-number>
Resets the EPON daily counters on a
port.
A port number contains three or four
digits, such as 101 or 1402. The digit(s)
before 0 in a port number corresponds to
the card slot on the OLT, and the last digit
denotes the port type (1 for PON port
and 2 for uplink port).
logging
Resets the log table.
configure
Accesses Configuration mode. See
Section 19.10.3 on page 159 for the
available commands.
copy running-config tftp
<ip> <remote-file>
Backs up the current configuration to a
file on a computer using TFTP.
tftp config <index>
<ip> <remote-
file>
Restore a previous backup configuration
file to the device. The device will not use
the restored configuration until the next
restart.
flash <ip>
<remote-file>
Restores a previous backup
configuration file to the running
configuration.