ZyXEL Communications OMC-2301, User Manual

Page: 171 / 224

Chapter 19 Introducing the Commands
OMC-2301 User’s Guide
171
19.10.9 priority-profile Commands
The following table lists the
priority-profile
commands in configuration mode. Use
these commands to configure priority profiles.
19.10.10 vlan-profile Commands
The following table lists the
vlan-profile
commands in configuration mode.
Table 56 priority-profile Commands
COMMAND DESCRIPTION
priority-
profile <name>
Sets a descriptive name for the
profile and enters the priority-
profile mode.
active
Enables this profile.
end
Exits from the priority-profile
mode
exit
Exits from the configuration
mode.
l2-rule <1-8> active
Enables the layer2 priority
rule(s) in the profile.
classifier
<ethertype>
Sets a classifier type.
direction
<downstream|upstream>
Sets the traffic direction to
prioritize.
no active
Disables the layer2 priority
rule(s) in the profile.
queue <0-3>
Specifies the outgoing queue
for the prioritized traffic.
value
ethertype:<0x0000-
0xFF0F
Sets the Ethernet type of the
traffic to prioritize.
vlan-priority <0-7>
Sets the VLAN priority.
l3-rule <1-8> active
Enables the layer3 priority
rule(s) in the profile.
address <IPv4
Address>
Specifies the source or
destination IP address of the
packets to classify.
classifier <src-
ip|dest-ip>
Sets a classifier type.
direction
<downstream|upstream>
Selects the direction of the
traffic to apply the policy
settings.
no active
Disables the layer3 priority
rule(s) in the profile.
queue <0-3>
Specifies the outgoing queue
for the prioritized traffic.
no active
Disables the priority profile.
tos-to-cos tos <0-7>
cos <0-7>
Sets the TOS-to-COS mapping.