ZyXEL Communications OMC-2301, User Manual

Page: 169 / 224

Chapter 19 Introducing the Commands
OMC-2301 User’s Guide
169
dba delay <low|high>
Sets the delay tolerance.
low : Low delay tolerance. Packets
get services faster. Recommended for
real-time applications.
high : High delay tolerance. Packets
gets less service time slots.
min-up-bw <0-
16000> max-up-bw
<16-16000>
Sets the minimum and maximum
upstream bandwidth.
priority-class
<0-7>
Sets the priority for the logical link to
which this profile is applied.
dn-policing
Enables policy settings on the
downstream traffic.
max-burst <0-
8191>
Sets the maximum size allowed (in
Kb) for a single downstream burst.
max-dn-bw <0-
8000>
Sets the maximum downstream
bandwidth (in Kbps). The number you
entered is multiplied by 64.
dn-queue
Enables downstream priority queuing.
queue <0-3> size
<0-9152>
Sets the queue size.
dn-queue-policing
Enables downstream queue policing.
queue <0-3> max-
bw <1-10000>
Sets the maximum bandwidth for the
queue.
encryption-mode
<both|downstream>
Sets data encryption on the
downstream and/or upstream traffic.
end
Exits from the epon-profile mode.
exit
Exits from the configuration mode.
no active
Disables this profile.
address-learning
Disables MAC address learning for
this profile.
dn-policing
Disables policy settings on the
downstream traffic.
dn-queue
Disables downstream priority queuing.
dn-queue-
policing
Disables downstream queue policing.
encryption-mode
Disables data encryption.
onu-phy auto-
negotiation
Disables auto-negotiation on the PON
port.
onu-phy flow-
control
Disables flow control for the
connection to the ONU.
onu-phy power-
down
Enables the connection to the ONU.
up-queue
Disables upstream priority queuing.
up-queue-
policing
Disables upstream queue policing.
Table 54 epon-profile Commands (continued)
COMMAND DESCRIPTION