ZyXEL Communications OMC-2301, User Manual

Page: 167 / 224

Chapter 19 Introducing the Commands
OMC-2301 User’s Guide
167
19.10.6 epon-onu4-profile Commands
The following table lists the
epon-onu4-profile
commands in configuration mode. Use
these commands to configure connection and port-based VLAN setttings for a 4-port ONU.
no igmp-last-member
Disables IGMP group leave
confirmation check.
igmp-proxy
Disables IGMP proxy.
igmp-snooping
Disable IGMP snooping.
p2p-access <port-
list>
Disables communication
between ONUs.
p2p-access <port-list>
Enable communication
between ONUs on the specified
port(s).
up-multicast-forward
01:80:C2:00:00:XX
<discard|pass>
Sets the action for upstream
multicast packets.
up-priority-to-queue
priority <0-7> queue <0-3>
Sets the IEEE 802.1p priority
queue mapping for the
upstream traffic.
Table 52 epon-common Commands (continued)
COMMAND DESCRIPTION
Table 53 epon-onu4-profile Commands
COMMAND DESCRIPTION
epon-onu4-
profile <name>
Sets a descriptive name for the profile
and enters the epon-onu4-profile
mode.
active
Enables this profile.
dn-queue
Enables downstream priority queuing.
queue <0-3> size
<0-960>
Sets the queue size.
end
Exits from the epon-onu4-profile
mode.
exit
Exits from the configuration mode.
no active
Disables this profile.
dn-queue
Disables downstream priority queuing.
onu-phy port <1-
4> auto-
negotiation
Disables auto-negotiation on the
specified port of the ONU
onu-phy port <1-
4> flow-control
Disables flow control for the
connection to the specified port on the
ONU.
onu-phy port <1-
4> power-down
Enables the connection to the
specified port on the ONU.
port-based-vlan
<cr>
Disables port-based VLAN on the
ONU.