ZyXEL Communications OMC-2301, User Manual

Page: 170 / 224

Chapter 19 Introducing the Commands
OMC-2301 User’s Guide
170
19.10.8 onu Commands
The following table lists the
onu
commands in configuration mode. Use these commands to
configure service profiles for an ONU.
onu-phy
auto-negotiation
Sets the device to establish the
connection to the ONU using auto-
negotiation for the link speed and
duplex mode.
flow-control
Enables flow control for the
connection to the ONU.
power-down
Disables the connection to the ONU.
speed-duplex
<10H|10F|100H|10
0F|1000F>
Sets the connection speed and duplex
mode to the ONU.
up-queue
Enables upstream priority queuing.
queue <0-3> size
<0-9152>
Sets the queue size.
up-queue-policing
Enables upstream queue policing.
queue <0-3> max-
bw <1-10000>
Sets the maximum upstream for the
queue.
Table 54 epon-profile Commands (continued)
COMMAND DESCRIPTION
Table 55 onu Commands
COMMAND DESCRIPTION
onu <name>
<port-list>
Sets a descriptive name for the
profile and enters the service
command mode.
active
Enables this profile.
classification-profile
<profile-name>
Sets the classifier profile for this
service.
end
Exits from the priority-profile
mode
epon-profile <profile-
name>
Sets the EPON profile for this
service.
exit
Exits from the configuration
mode.
no active
Disables the service profile.
onu4-profile <onu4-
name>
Sets the ONU-4 profile for this
service.
onu-mac <mac-addr>
Sets the MAC address of the
ONU to which the service
profile is applied.
priority-profile
<profile-name>
Sets the priority profile for this
service.
vlan-profile <profile-
name>
Sets the VLAN profile for this
service.