ZyXEL Communications OMC-2301, User Manual

Page: 154 / 224

Chapter 19 Introducing the Commands
OMC-2301 User’s Guide
154
ip
Displays the IP settings.
mac-address <port-number>
Displays the PON port’s MAC address table.
<port-number>
llid
Displays the logical link’s MAC address table.
<port-number>
static
Displays the PON port’s static MAC address table.
mac-aging-time
Displays the MAC learning aging time.
onu
Displays ONU information.
<port-number>
Displays ONU information on the specified PON port.
A port number contains three or four digits, such as 101
or 1402. The digit(s) before 0 in a port number
corresponds to the card slot on the OLT, and the last
digit denotes the port type (1 for PON port and 2 for
uplink port).
p2p-access
Displays the p2p port number(s).
port-access-
authenticator
Displays port authentication settings on all ports.
<port-list>
Displays port authentication settings on the specified
port.
priority-
profile
Displays the priority profile summary table.
queue-mapping
Displays the queue mappings.
radius-server
Displays the RADIUS server settings.
remote-
management
Displays remote management settings.
<index>
Displays specified remote management settings.
service-
control
Displays access service control settings.
snmp-server
Displays SNMP settings.
syslog
Displays system logging settings.
system-
information
Displays the system information (such as the firmware
version, modem code, hardware version, etc.).
time
Displays current system time and date.
timesync
Displays the time zone and Network Time Protocol
(NTP) settings.
uplink
Displays port settings for all Gigabit Ethernet ports.
<port-number>
Displays port settings for the specified Gigabit Ethernet
port.
A port number contains three or four digits, such as 101
or 1402. The digit(s) before 0 in a port number
corresponds to the card slot on the OLT, and the last
digit denotes the port type (1 for PON port and 2 for
uplink port).
status
Displays the connection status of all Gigabit Ethernet
ports.
Table 48 Command Summary: User Mode (continued)
COMMAND DESCRIPTION