ZyXEL Communications OMC-2301, User Manual

Page: 153 / 224

Chapter 19 Introducing the Commands
OMC-2301 User’s Guide
153
<port-num>
Removes all learned MAC address on the specified
port(s).
ping <ip|host-name> [ size <0-
1472> ][ -t ]
Sends Ping request to an Ethernet device.
help
Displays command help information.
show classifier-
filter-profile
Displays the classifier filter profile summary table.
dba-mode
Displays the dynamic bandwidth allocation mode the
OMC is using.
epon
Displays the PON port status.
<port-number>
Displays ONU information on the specified PON port.
A port number contains three or four digits, such as 101
or 1402. The digit(s) before 0 in a port number
corresponds to the card slot on the OLT, and the last
digit denotes the port type (1 for PON port and 2 for
uplink port).
<port-number>
<llid>
Displays the ONU status on a logical link on the
specified PON port.
epon-counter <port-number>
Displays the port statistics of the specified PON port.
<port-number>
<llid>
Displays the connection statistics of the ONU on the
specified logical link.
onu <port-
number> <llid>
Displays ONU connection counters.
epon-da-filter <port-number>
Displays destination address (DA) filter(s) configured on
the specified port.
epon-daily-
counter <port-number>
Displays the EPON daily counters on a port.
A port number contains three or four digits, such as 101
or 1402. The digit(s) before 0 in a port number
corresponds to the card slot on the OLT, and the last
digit denotes the port type (1 for PON port and 2 for
uplink port).
onu <port-
number> <llid>
Displays the daily link statistics on the link ID(s).
epon-onu4-
profile
Displays the EPON 4-port ONU profile summary table.
epon-profile
Displays the EPON profile summary table.
hardware-
monitor <C|F>
Displays the hardware temperature and statistics.
igmp-group
Displays the IGMP table.
<port-number>
Displays the IGMP table on the specified PON port.
A port number contains three or four digits, such as 101
or 1402. The digit(s) before 0 in a port number
corresponds to the card slot on the OLT, and the last
digit denotes the port type (1 for PON port and 2 for
uplink port).
<port-number>
<llid>
Displays the IGMP table for the specified logical link.
Table 48 Command Summary: User Mode (continued)
COMMAND DESCRIPTION