ZyXEL Communications OMC-2301, User Manual

Page: 149 / 224

Chapter 19 Introducing the Commands
OMC-2301 User’s Guide
149
where
19.6 Command Modes
There are three CLI command modes: User, Enable and Configure.
When you first log into the CLI, the initial command mode is User mode. User mode
commands are a subset of Enable mode commands. The User mode command prompt ends
with an angle bracket (>).
To enter Enable (or privileged) mode, type
enable
and enter a password when prompted (the
default is 1234). When you enter the Enable mode, the command prompt changes to the pound
sign (
#
).
To enter the configuration mode, type
configure
or
config
. The Configure mode command
prompt consists of the word “
config
” and the pound sign (
#
). The following table describes
how to access the various sub configuration modes.
<password>
= Specifies the new password (up to 32 alphanumeric
characters) users have to type in to enter Enable and Config
modes.
Table 47 Sub Configuration Modes
SUB COMMAND MODE DESCRIPTION
classifier-filter-profile To enter the classifier-filter-profile mode, enter
classifier-filter-
profile
followed by a descriptive name for the profile.
For example, enter
classifier-filter-profile Web
to create a
new
Web
profile and enter sub configuration mode.
epon-common To enter the classifier-filter-profile mode, enter
epon-common
.
epon-onu4-profile To enter the epon-profile mode, enter
epon-onu4-profile
followed by
a descriptive name for the profile.
For example, enter
epon-onu4-profile Test
to create a new
Test
profile and enter sub configuration mode.
epon-profile To enter the epon-profile mode, enter
epon-profile
followed by a
descriptive name for the profile.
For example, enter
epon-profile Basic
to create a new
Basic
profile and enter sub configuration mode.
priority-profile To enter the priority-profile mode, enter
priority-profile
followed by
a descriptive name for the profile.
For example, enter
priority-profile High
to create a new
High
profile and enter sub configuration mode.
onu To enter the onu mode, enter
onu
followed by a descriptive name.
For example, enter
onu Standard
to create a new
Standard
ONU
profile and enter sub configuration mode.
vlan-profile To enter the vlan-profile mode, enter
vlan-profile
followed by a
descriptive name for the profile.
For example, enter
vlan-profile Example
to create a new
Example
profile and enter sub configuration mode.