ZyXEL Communications OMC-2301, User Manual

Page: 44 / 224

Chapter 4 Initial Setup Example
OMC-2301 User’s Guide
44
"
On the OLC-2301, the Gigabit Ethernet port connects only at 1000 Mbps.
3 Connect an ONU to the PON port on the OLC-2301.
4
Turn on the connected devices and check the LEDs on the OLC-2301. The LEDs for the
PON and the Ethernet port should be on.
4.3 Creating a Service Profile
Log into the OMC for management and create a service profile for the ONU. The service
profile is to use a pre-defined connection profile to limit the upstream and downstream
bandwidths to 100 Mbps.
1 Connect your computer to the MGMT port and set your computer to use a static IP
address in the range 192.168.0.2 ~ 192.168.0.254 with a subnet mask of 255.255.255.0.
2 Open a web browser and enter the management IP address of the OMC. The default is
192.168.0.1.
3 Enter the login username (“admin” is the default) and password (“1234” is the default)
and Click
OK .
4 The Status screen displays.
Click PON Port 101 to
display the EPON Info
screen and check the MAC
address of the ONU.
"
The digit(s) before 0 in a port number corresponds to the card slot on the OLT,
and the last digit denotes the port type (1 for PON port and 2 for uplink port).
5
Click Basic Setting > ONU Setup .
6 In the EPON ONU Setup screen, create a service profile for the ONU by clicking the
ONU name “Default” of Port 101 in the table below. Enter a new descriptive name in
the ONU Name field (for example, “TestSetup”).
7
In the MAC Address field, select the second radio button and the ONU’s MAC address
from the drop-down list box.