ZyXEL Communications OMC-2301, User Manual

Page: 188 / 224

Chapter 20 Command Examples
OMC-2301 User’s Guide
188
Use these commands to create an ONU service profile and apply it to the specified fiber
port(s).
"
You must first create an ONU service profile name on the specified fiber port
using the
onu <name> <port-list>
command.
The following figure shows an example.
• Create an ONU service profile called
test
on PON port 701.
• Enable the profile.
• Apply the profile to an ONU with the MAC address of
00:13:49:00:00:00
.
• Set the
test
service profile to use the
normal
priority profile and the default profiles for
other profile types.
20.12 vlan-profile Commands
This section shows you how to configure a VLAN profile on the downstream traffic.
Syntax:
vlan-profile <name>
vlan-profile <name> active
vlan-profile <name> downstream rule <1-7> active
vlan-profile <name> downstream rule <1-7> type <ethertype| ipv4| vlan>
vlan-profile <name> downstream rule <1-7> action <delete| exchange| none>
vlan-profile <name> downstream rule <1-7> new-vid <1-4094>
vlan-profile <name> downstream rule <1-7> priority-src <original| priority-
profile>
vlan-profile <name> downstream rule <1-7> type <ethertype| ipv4| vlan>
vlan-profile <name> downstream rule <1-7> value ethertype:<0x0000-
0xFF0F>|ipv4<1-255>|vid <1-4094>>
vlan-profile <name> downstream-def-rule action <delete|exchange> vid <1-4094>
priority-src <original| priority-profile>
vlan-profile <name> downstream-def-rule action none
priority-profile
<profile-name>
= Specifies a priority profile for this ONU profile. If you do
not specify a priority profile, the default profile applies.
vlan-profile <profile-
name>
= Specifies a VLAN profile for this ONU profile. If you do
not specify a VLAN profile, the default profile applies.
sysname(config)# onu test 101
sysname(config-service)# active
sysname(config-service)# onu-mac 00:13:49:00:00:00
sysname(config-service)# priority-profile normal
sysname(config-service)#