ZyXEL Communications OMC-2301, User Manual

Page: 183 / 224

Chapter 20 Command Examples
OMC-2301 User’s Guide
183
• Set the traffic priority to 4 (medium).
20.8 Configuration File Maintenance
This section shows you how to backup or restore the configuration file on the OMC using
TFTP.
20.8.1 Backing up Configuration
Syntax:
copy running-config tftp <ip> <remote-file>
where
This command backs up the current configuration file on a TFTP server. The following
example backs up the current configuration to a file (
test.cfg
) on the TFTP server
(
172.16.19.96
).
20.8.2 Using a Different Configuration File
You can store up to two configuration files on the OMC. Only one configuration file is used at
a time. By default the OMC uses the first configuration file (with an index number of 1). You
can set the OMC to use a different configuration file. There are two ways in which you can set
the OMC to use a different configuration file: restart the OMC (cold reboot) and restart the
system (warm reboot).
Use the
boot config
command to restart the OMC and use a different configuration file (if
specified). The following example reboots the switch to use the second configuration file.
Figure 73 boot config Command Example
sysname(config)# epon-profile plan2dn
sysname(config-epon-profile)# dn-policing
sysname(config-epon-profile)# encryption both
sysname(config-epon-profile)# dba min-up-bw 2000 max-up-bw 30000
sysname(config-epon-profile)# dba priority-class 4
<ip> =
The IP address of a TFTP server on which you want to store the
backup configuration file.
<remote-file> =
Specifies the name of the configuration file.
sysname# copy running-config tftp 172.16.19.96 test.cfg
Backuping
. (683)Bytes Done!
sysname#
sysname# boot config 2