ZyXEL Communications OMC-2301, User Manual

Page: 156 / 224

Chapter 19 Introducing the Commands
OMC-2301 User’s Guide
156
disable
Exits Enable (or privileged) mode.
enable
Accesses Enable (or privileged) mode.
erase running-config
Resets the current configuration to the
factory default settings.
user-config
Resets all settings to the factory defaults
except the following settings:
•
SNMP
• syslog
• NTP time server
exit
Exits Enable (or privileged) mode.
help
Displays help information.
history
Displays a list of command(s) that you
have previously executed.
line-card-
reset <line-card-list>
Rests the specified line card(s).
logout
Exits Enable (or privileged) mode.
mac-flush
Clears the MAC address table.
<port-number>
Removes all learned MAC address on
the specified port(s).
onu
firmware-
upgrade <port-number> <llid-
list>
Upgrades the firmware to the specified
ONU(s) on the specified port.
A port number contains three or four
digits, such as 101 or 1402. The digit(s)
before 0 in a port number corresponds to
the card slot on the OLT, and the last digit
denotes the port type (1 for PON port
and 2 for uplink port).
onu reset <port-number> <llid-
list>
Resets the connection the ONU. This is
for troubleshooting purposes.
ping <ip|host-name>
Sends Ping request to an Ethernet
device.
[ size <0-1472>
][ -t ]
Sends Ping request to an Ethernet
device with the specified parameters.
help
Displays command help information.
port-test <port> <llid-list>
Starts the loopback test to the specified
ONU.
reload config <index>
Reboots the system.
session-
timeout <1-1440>
Sets the management session timeout
(in minutes).
show classifier-filter-
profile
Displays classifier filter profile summary
table.
<profile-name>
Displays detailed settings of the specified
classifier filter profile.
dba-mode
Displays current DBA (Dynamic
Bandwidth Allocation) method the device
uses.
epon
Displays the status of all PON ports.
Table 49 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION