ZyXEL Communications OMC-2301, User Manual

Page: 98 / 224

Chapter 10 Static MAC Forward Setup
OMC-2301 User’s Guide
98
10.3 Configuring Static MAC Forwarding
Click Advanced Applications > Static MAC Forwarding and click a Static MAC
Forwarding link to display a configuration screen. Use this screen to set the OLT to forward
packets with the specified MAC address to the selected ONU.
Figure 37 Static MAC Forwarding
The following table describes the labels in this screen.
Number of
Static MAC
This field displays the number of static MAC forwarding rules you have configured for
this port.
Static MAC
Forwarding
Click the link to display a screen where you can configure a static MAC forwarding
rule.
Table 27 Static MAC Forwarding Status (continued)
LABEL DESCRIPTION
Table 28 Static MAC Forwarding
LABEL DESCRIPTION
Port No This read-only field displays the port index number.
Active Select this check box to activate your rule. You may temporarily deactivate a rule
without deleting it by clearing this check box.
Name Enter a descriptive name (up to 20 printable ASCII characters) to identify this rule.
ONU Name Select the name of the ONU to which this rule applies.
MAC Address Enter the MAC address (six hexadecimal character pairs) of the device whose traffic
you want to filter.
Add After you set the fields above, click Add to insert a new rule.
Cancel Click Cancel to reset the fields.
Clear Click Clear to begin configuring this screen afresh.
Index Click an index number to modify the settings.
Active This field displays whether this static MAC address forwarding rule is active ( Yes ) or
not ( No ). You may temporarily deactivate a rule without deleting it.
Name This field displays the descriptive name for this rule.
ONU Name This field displays the name of the ONU to which this rule is applied.