ZyXEL Communications OMC-2301, User Manual

Page: 159 / 224

Chapter 19 Introducing the Commands
OMC-2301 User’s Guide
159
19.10.3 General Configuration Mode
The following table lists the commands in Configuration (or Config) mode.
vlan-profile
Displays VLAN profile summary table.
<profile-name>
Displays detailed settings of the specified
VLAN profile.
ssh <1|2> <[user@]dest-ip>
Connects to an SSH server with the
specified SSH version.
[command </>]
Connects to an SSH server with the
specified SSH version and addition
commands to be executed on the server.
traceroute <ip|host-name>
Determines the path a packet takes to a
device.
[out-of-band]
[ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
Determines the path a packet takes to a
device through the MGMT port.
help
Displays command information.
write log
Saves system logs to the OMC.
memory
Saves current configuration to the
configuration file the OMC is currently
using.
<index>
Saves the configuration to the specified
configuration file on the switch.
Table 49 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION
Table 50 Command Summary: Configuration Mode
COMMAND DESCRIPTION
admin-password <pw-string> <confirm-
string>
Changes the administrator
password.
classifier-
filter-profile <name>
Sets a descriptive name for the
classification filter and enters
the classifier-filter-profile mode.
Refer to Section 19.10.4 on
page 165 for the available
commands.
end
Exits Configuration mode.
epon-common
Enters the epon-common
mode. Refer to Section 19.10.5
on page 166 for the available
commands.
epon-da-filter port <port-number>
name <name> onu <onu-
name> mac <mac-addr>
action <discard|pass>
Configures a destination filter to
allow/block traffic to the
specified destination MAC
address.
inactive
Disables a destination filter.
epon-mac-forward port <port-number>
name <name> onu <onu-
name> mac <mac-addr>
Configures a static MAC
address forwarding rule.