Chapter 3: Configuration and commissioning
ZP2 Series Installation Manual
69
To add custom screen images:
1. Open the control panel door and insert the USB flash drive into either of the
USB type A connectors (see Figure 4 on page 17). Close the control panel
door.
2. Select Panel setup from the Main menu.
3. Select Configuration, and then select Load auxiliary files.
4. Select Splash screens.
5. Select the logo1.bin file to load and confirm the selection.
6. Press F4 (Enter), and then press F1 (Back).
7. Press F1 (Save), F3 (Apply), F4 (Discard), or F2 (Exit).
Remember to apply saved settings from the Main menu.
8. Remove the USB flash drive as described in “Removing a USB device” on
page 44.
Adding language files or fonts
Select Languages or Language fonts to add language files or fonts provided by
the manufacturer.
To add language files or fonts:
1. Open the control panel door and insert the USB flash drive with the required
files into either of the USB type A connectors (see Figure 4 on page 17).
Close the control panel door.
2. Select Panel setup from the Main menu.
3. Select Configuration, and then select Load auxiliary files.
4. Select Languages or Language fonts.
5. Select the file to load and confirm the selection.
6. Press F4 (Enter), and then press F1 (Back).
7. Press F1 (Save), F3 (Apply), F4 (Discard), or F2 (Exit).
Remember to apply saved settings from the Main menu.
8. Remove the USB flash drive as described in “Removing a USB device” on
page 44.
System update
Caution:
Updating the control panel firmware may delete the current installation
configuration data. Always back up your configuration data before updating the
control panel firmware.
Select System update to load control panel firmware updates provided by the
manufacturer. The update application may only be available in English.
Summary of Contents for ZP2 Series
