background image

128-8710

1 of 12

Page 1

Model  PRO-9776i

Owner’s Manual

5 Button Remote Start Security System With

Plug-In Shock Sensor & Starter Disable

FEATURES:

 2 Five Button Programmable RF Transmitters

 Seven Channel Code Learning Receiver (capable of accepting 4 transmitters)

 Code Hopping Technology

 Selectable Manual Override Mode

 Remote Panic in all modes

 Protected Valet/Override

 Combo Remote Start Safety Control/Valet/Programming Push-Button LED Switch

 Selectable Automatic Timed Start Mode

 User Programmable Manual Override Code

 7 Function LED - Arm / Disarm / Zone 1 / Zone 2 / Zone 3 / Valet / Arming

 Intrusion Alert with Memory

 Audible Arm / Disarm / Defective Zone / Tamper Confirmation

 Instant Siren Activation When Used

 Starter Disable When Armed

 True Last Door Arming

 Defective Zone By-Pass

 Active or Passive Arming Selectable

 Programmable Auto Lock On / Off

 Programmable Auto Unlock / Off/Drivers Door/All Doors

 Programmable Door Lock Pulse Duration 1 Second / 3.5 Seconds/1 Sec L/ Dbl. U/L

 Channel 4, 5, 6, & 7 Output to Control Optional Accessories

 Programmable Active or Passive Door Locks

 User Programmable Permanent Chirp Delete

 On Command RF Chirp Delete from Transmitter Or Selectable Through Software

 Car Horn Activation for alarm response

 Additional Negative Trigger Input

 RF Inhibit with ignition on

 Parking Light Flasher

 Remote Keyless Entry With Optional Access Guard (must have power door locks)

 Illuminated Entry

 Plug In Dual Stage Shock Sensor

 Dome Delay Learn Circuitry (Patented)

OPTIONS :

 6 Tone Multi Tone Siren

      

 Telematic Upgrade Ready



 Plug In Flash Logic By-Pass Capable

 Remote Trunk Release (must have electronic trunk release)

 Multiple Vehicle Capable

 Remote Power Window Roll Up

 Remote Garage Door Interface

 Multiple Vehicle Capable

CAUTION !

Be certain that the vehicle is outdoors before using this or any remote vehicle

starting device.  A running engine produces dangerous carbon monoxide fumes

which can be harmful or fatal if prolonged exposure occurs.  DO NOT remote

start the vehicle if it is garaged.

Summary of Contents for PRO-9776i













Reviews: