Ziton ZP2 Series, Installation Manual

Page: 45 / 148

Chapter 3: Configuration and commissioning
ZP2 Series Installation Manual 39
Configuration options
The options listed below are available when making configuration changes to the
control panel.
The control panel configuration (and configuration revision) is only updated when
configuration changes are applied by pressing F3 (Apply).
The configuration revision change and timestamp are recorded in the Revision
report and can be accessed at operator, maintenance, and installer levels.
Table 16: Configuration control options and keys
Option
Key Description
Save F1 Saves the current configuration change without applying it immediately.
Apply F3 Applies the current configuration change and all stored (saved)
configuration changes. The control panel resets automatically.
Discard F4 Discards all stored (saved) configuration changes that have not been
applied.
Exit F2 Exits the configuration process without storing or applying the current
configuration change.
Note:
When updating multiple configuration settings, we recommend that you
save after each change, and then apply all changes from the Main menu.
Maintenance level operation and
configuration
The maintenance level is password-protected and is reserved for authorized
users trained to operate the control panel and perform routine maintenance tasks
for the fire system. The default password for the default maintenance user is
3333.
The maintenance level lets you:
• Perform all operator level tasks described in the operation manual
• Change the control panel time and date and synchronize the time and date in
a fire network
• Change the day/night mode time and holiday calendar settings (fire alarm
control panels only)
• Change the TCP/IP, email, and USB communications settings
• Back up or clear the event log
• View and save reports
• Disable or enable system features or loop devices
• Test zones, inputs, outputs (including output groups), and batteries
• Change the user passwords
• Locate devices
• Activate service mode for testing purposes