Ziton ZP2 Series, Installation Manual

Page: 92 / 148

Chapter 3: Configuration and commissioning
86 ZP2 Series Installation Manual
4. Select the input type.
See Table 48 below for a list of available input types.
5. Press F4 (Enter), and then press F1 (Back).
6. Press F1 (Save), F3 (Apply), F4 (Discard), or F2 (Exit).
Remember to apply saved settings from the Main menu.
Table 48: Configurable input types
Type
Description
LG (default) Logged activation. An unlatched condition that generates no indications
but it is only stored on the event log.
T_AL Technical alarm activation. A latched condition indicated on the LCD
and stored in the event log.
This input type can be used for gas detectors.
T_ALu Technical alarm activation. An unlatched condition indicated on the LCD
and stored in the event log.
This input type can be used for gas detectors and for connecting to
aspirating detector Alert outputs.
DT_AL Disable technical alarm inputs. When active, this input disables all the
technical alarm inputs (latched and unlatched).
DET Detector alarm.
This input type can be used for connecting to aspirating detector Fire1
outputs.
MCP Manual call point alarm.
This input type can be used for connecting to aspirating detector Fire2
outputs.
PREAL Prealarm (unlatched).
This input type can be used for connecting to aspirating detector Action
outputs.
RST Activation resets the panel remotely. To reset again, the input must be
deactivated, and then activated again.
FLT External fault. Activation generates a latched fault event indicated as an
external fault.
DAY Day mode. When this input is activated, the control panel switches to
day mode until the next scheduled night mode change (or until the
output is deactivated).
NIGHT Night mode. When this input is activated, the control panel switches to
night mode until the next scheduled day mode change (or until the
output is deactivated).
FOS Fault Warning Output Open Supervision. By using a 2010-FS-EOL end-
of-line device, the control panel can supervise the open circuit condition
of the Fault Warning output.