CAUTION!
Caution!
Material damage is possible if the corresponding precautions are not taken!
Danger!
Danger by dangerous, electric voltage! Death or severe injury can occur if the corresponding
precautions are not taken!
Information
Important information and advice for user
2.4
Product safety
The device conforms to the state of the art at the time of delivery and is fundamentally considered to
be reliable. The device and its accessories must only be used in a
fl
awless condition and installed and
operated with compliance to the operating instructions.
Exceeding the limits stated in the
“
Enclosure / technical data
”
chapter can lead to a defect in the
device.
2.5
Requirements placed on the personnel / due diligence
Persons entrusted with the planning, installation, commissioning and maintenance and servicing in
connection with the device must have the corresponding quali
fi
cations and skills for these jobs. Based
on their training, knowledge and experience as well as knowledge of the relevant standards, they
must be able to judge the work transferred to them and be able to recognize possible hazards.
In addition, they must be knowledgeable about the safety regulations, EU directives, rules for the
prevention of accidents and the corresponding national as well as regional and in-house regulations.
Personnel to be trained or instructed and apprentices are only permitted to work on the device under
the supervision of an experienced person. This also applies to personnel undergoing general training.
Comply with the legal minimum age
2.6
Commissioning
Danger!
During commissioning, unexpected and hazardous conditions can arise in the entire installation due to
defective adjustments, defective components or incorrect electrical connections
During the commissioning following has to be observed:
•
Remove all persons and objects from the hazardous area
•
The EMERGENCY-STOP functions must be in working order
•
The mechanical safety brakes must be installed and in working order
•
Commissioning is only permitted with compliance to the EMC directive 39/336/EEC
2.7
Working on device/hazards through residual voltage
Before working on previously installed devices, separate them from the mains and secure them
against reconnection.
Danger!
Through use of capacitors, danger of death exists even after switching off the device through directly
touching the energized parts or due to parts that have become energized due to faults.
Wait at least
3 minutes
before working on the device.
The safe isolation from the supply must be checked using a
two-pole
voltage detector.
Danger!
It is generally forbidden to carry out work on electrical live parts. Protection class of the device when
open is IP 00! It is possible to touch hazardous voltages directly!
Original operating instructions
ZETADYN 3C
Safety instructions
R-TBA08_03-GB 1619
Part.-No. 00163322-GB
10/204
