EDA-Z5008, Z5020 & Z5100 – Technical Manual
ZPControlTechMan_r105
_____________________________________________________________________________________________________
35
Enable a Zone – all access levels
1.Main Menu>>2.Disable/Enable>>2.Enable>>1.Zone
To enable a previously disabled zone, select it using the
↑
or
↓
keys and press
Enter
. To enable more
zones press
Enter
, or
Cancel
to exit. If all zones have been enabled
‘No Zones to enable’
will be
displayed. If a disabled zone is enabled; and no other isolated devices/zones remain, then the
‘Disablements’ LED will extinguish.
Enable a Device – all access levels
1.Main Menu>>2.Disable/Enable>>2.Enable>>2.Device
This menu allows the user to enable a previously disabled device.
Using the ↑ or ↓ keys select the device number to be enabled and
press Enter. To enable more devices, press Enter, or Cancel to exit.
If all devices have been enabled ‘No Devices to enable’ will be
displayed. If a previously disabled device is enabled; and no other
isolated devices/zones remain, then the ‘Disablements’ LED will
extinguish.
Enable Panel Input – all access levels
1.Main Menu>>2.Disable/Enable>>2.Enable>>3.Panel Input
Select this option to enable an input that has previously been disabled. Choose the input from the list
and press Enter to confirm.
Enable Sounders – all access levels
1.Main Menu>>2.Disable/Enable>>2.Enable>>4.Sounders
Select this option to enable the sounders if they have been previously disabled.
Enable Fire Routing – all access levels
1.Main Menu>>2.Disable/Enable>>2.Enable>>5.Fire Routing
Select this option to enable the fire routing relay, if it has been previously disabled.
Enable Fault Relay – all access levels
1.Main Menu>>2.Disable/Enable>>2.Enable>>6.Fault Relay
Select this option to enable the fault relay if it has been previously disabled. To comply with EN54, the
fault relay should not be disabled.
Enable Faults – commissioning users
1.Main Menu>>2.Disable/Enable>>2.Enable>>7.Faults
The enable faults list allows the user to choose which fault to enable from all the disabled faults
present on the system. To comply with EN54, faults should not be disabled.
Press ENTER to
Disable Device 001
Select Device 001↕
SMOKE DET
Use ← → keys
