66
Description
G-30-1607-en
OPMI® VARIO on S8, S81 & S88 Suspension Systems
Issue 5.0
Printed on 30. 01. 2009
Xenon illumination system
Warning!
The suspension system with xenon illumination must not be used for oph-
thalmic procedures.
The suspension system is equipped with a xenon illumination system for
fiber illumination. The xenon lamp generates light whose spectrum re-
sembles that of natural daylight. Regardless of the brightness setting, the
color temperature of the light always remains the same. Normal daylight
film without any additional conversion filters can therefore be used for
photographic documentation. The lamp housing contains two xenon
lamps. The second lamp is used as a backup lamp which must be swung
into the illumination beam path should the first lamp fail.
Ventilation grid
Do not cover the ventilation grid! For example, drapes could be covering
the grid. This can cause the lamp modules to overheat and lead to lamp
failure.
1
Lamp module
2
Manual activation of the backup bulb
•
If the xenon bulb fails, open the lamp module as follows: Press
button (7). The lamp module is slightly ejected.
•
Pull out the lamp module as far as it will go.
•
Turn knob (2) 180° until it snaps in place. This moves the backup bulb
into the illumination beam path.
•
Push the lamp module all the way back into the lamp housing.
•
Reset service hour counter (5) to "0". Use a pointed object and press
it into the recess of reset button (6).
