134
Preparations
G-30-1607-en
OPMI® VARIO on S8, S81 & S88 Suspension Systems
Issue 5.0
Printed on 30. 01. 2009
Connections
Connecting the surgical microscope
•
Turn locking cap (1) by a quarter turn to the right or left and pull up cov-
er (2).
•
Plug microscope connector (3) into connector (4) and tighten the se-
curing screws on the microscope connector.
•
Press the microscope cable into cable clip (5). Install the cable in such
a way that it is neither stretched nor kinked when the microscope is
turned or tilted.
•
Press down cover (2) as far as it will go and lock it with cap (1).
Note:
The illustration on the right shows the surgical microscope in a rotated po-
sition.
Mounting the light guide
•
Switch off the illumination system.
•
Insert the end of the light guide into light guide socket (7) of the micro-
scope as far as it will go, and press the light guide into cable clip (6).
•
Make sure that the light guide has been routed with sufficient slack so
that the movement of the carrier system and surgical microscope is
not restricted and that they can be moved in all directions without
stretching, extreme kinking or twisting of the light guide.
Note:
Make sure that the light guide is not stretched or bent when the micro-
scope is turned or tilted.
