![background image](http://html1.mh-extra.com/html/zeiss/opmi-vario/opmi-vario_instructions-for-use-manual_3327672211.webp)
G-30-1607-en
OPMI® VARIO on S8, S81 & S88 Suspension Systems
Issue 5.0
Printed on 30. 01. 2009
Maintenance / Further information
211
Motorized focusing and
zoom functions of surgical
microscope are inoperative.
Manual function is acti-
vated. (Yellow LED above
the button is lit).
Switch off manual function.
-
Suspension arm is in hori-
zontal position and cannot
be moved upwards or down-
wards.
Suspension arm still locked. Pull out locking device and
turn though 180°.
-
In combination with three
successive beeps and dis-
play of the error code (XXX).
– Error message during
the software check after
power-on of the suspen-
sion system.
– Error message for an in-
ternal system error.
Manual operation is pos-
sible.
Contact service dept.,
specify error code and serial
no.
-
S88 floor stand only: stand
wobbles.
Floor not level. Stand base
not appropriately posi-
tioned.
Slightly turn stand base. Ar-
ticulated arm should be po-
sitioned at a right angle with
tilt axis.
Problem
Possible cause
Remedy
See
XXX