![background image](http://html2.mh-extra.com/html/zeiss/opmi-lumera-700/opmi-lumera-700_user-manual_3357350150.webp)
Preparations for use
OPMI LUMERA® 700
Version 7.3
Page 150
G-30-1673-en
Adjusting the surgical microscope
Adjusting the downward travel limit
When setting the stroke limits, proceed as follows:
• Loosen the adjustment screw (1) by a few counterclockwise turns.
• Press one of the release buttons for the magnetic brake on the surgical mi-
croscope and lower the surgical microscope to a point where focusing in
the operating field is still possible (depending on the focal distance of the
objective lens). Ensure that there is still sufficient safety distance to the op-
erating field.
• Turn the adjustment screw (1) clockwise as far as it will go.
• Lower the surgical microscope again to the lowest limit stop and check
the safety distance.
Fig. 72: Setting
downward travel
CAUTION
Risk of injury!
An improperly balanced systems will move upward or downward.
• Limit the stroke of the suspension arm to prevent any contact with the
patient if the surgical microscope is lowered accidentally.
1
Summary of Contents for opmi lumera 700
