Safety Measures
OPMI LUMERA® 700
Version 7.3
Page 10
G-30-1673-en
Notes for the operator
• Prior to using the device for the first time, please read the instructions for
use thoroughly. Also ensure to read the instructions of accessory tools.
• Only personnel who have undergone training and instruction are allowed
to use this instrument. It is the responsibility of the customer or institution
operating the equipment to train and instruct all staff using the equip-
ment.
• Only operate the device within the scope of its intended use.
• Please keep these instructions for use where there are easily accessible at
all times for the persons operating the system.
• Only personnel who have been appropriately briefed are allowed to con-
trol the surgical microscope via CALLISTO eye (option). Any change in the
focus and zoom setting via CALLISTO eye may lead to unwanted move-
ment at the surgical microscope during application (e.g. in the OP mode).
• Please observe all symbols and labels attached to the device! (see page 30)
• Observe the legal regulations for accident prevention and occupational
health and safety applicable in the country concerned.
• This system must not be modified without the manufacturer's approval. If
the system is modified, suitable inspections and testing must be complet-
ed to ensure that it can still be used safely.
The manufacturer is not liable for damage caused by unauthorized per-
sons tampering with the system. Furthermore, this will forfeit any rights
to claim under warranty.
• Modifications and repairs of this device or any equipment operated to-
gether with this device may only be performed by Carl Zeiss service staff
or other persons authorized by Carl Zeiss.
• Connect the system to a special emergency backup power supply in ac-
cordance with the regulations and directives applicable in the country of
use.
• Ensure that the installation requirements and the operation of the device
concur with the surgical conditions:
– minimum vibration
– clean environment
– do not use the device under extreme mechanical stresses
• Do not use any power-operated device that is part of the delivery scope
Summary of Contents for opmi lumera 700
