![background image](http://html2.mh-extra.com/html/zeiss/opmi-lumera-700/opmi-lumera-700_user-manual_3357350110.webp)
Preparations for use
OPMI LUMERA® 700
Version 7.3
Page 110
G-30-1673-en
Positioning and connecting the floor mount
Relocating the system
Proceed as follows when relocating the system over short distances:
• Turn off the device at the power switch.
• Remove the power plug from the wall socket.
• Set the suspension arm (1) of the floor mount into the transport position.
• Set the 22" TFT (if available) into the transport position.
• Thread the Velcro tape provided on bracket (4) and wrap it around the
suspension arm (2) and carrier arm (3) of the 22" TFT so that it locks into
place and does not unintentionally swing out.
• Wrap the foot control panel and power cables onto the cable holders.
• Attach the foot control panel to the maneuvering handle.
• Release the brake tabs on the casters.
• Hold the system by its maneuvering handle and carefully steer it to the
side. Make sure that the system is positioned on level ground.
• When you have reached the required position, press down the locking
tabs of all four casters and make sure that the stand is no longer able to
roll away by itself.
As the stand is very easy to maneuver, there is a tendency to underestimate
its weight. Therefore, move the stand slowly and carefully!
CAUTION
Risk of tipping!
Be careful when moving the device across sills; it may easily tip and/or injure
a person next to it.
• When lifting or pulling the system across a doorsill request the help
of a second person.
CAUTION
Risk of crushing!
Fingers may be crushed between the carrier arm and stand column.
• Never touch the area between carrier arm and stand column
while turning the support arm.
Summary of Contents for opmi lumera 700
