Preparations for use
OPMI LUMERA® 700
Version 7.3
Page 142
G-30-1673-en
Mounting accessories on the surgical microscope
Replacing components and accessories
Replace components as follow:
• Put the suspension arm in horizontal position, pull out the safety
button (1) and turn it 180° to the right or left.
Move the suspension arm slightly upward and downward until the lock
snaps in. Now the suspension cannot swing upward due to missing mass.
• Loosen securing screw (6) by a few turns.
• Remove dust cover (2) and store it in a safe place.
CAUTION
Risk of injury!
The swivel arm may move downward when accessories are changed.
• Never exceed the maximum permissible weight capacity of the suspen-
• Re-adjust the balance of the suspension arm after every change of acces-
• Adjust the limit of downward travel of the suspension arm in such a way
CAUTION
Risk of injury!
Incorrectly mounted accessories can fall down.
• Do not replace accessories over the patient.
• Before every use and after re-equipping the system, make sure that the
accessories are securely locked in position. Make sure that securing
screws (6) and (10) have been firmly tightened!
• Mount accessories such as the slit illuminator VISULUX (10) or
RESIGHT (8) only in accordance with the instructions of use.
Summary of Contents for opmi lumera 700
