![background image](http://html2.mh-extra.com/html/zeiss/opmi-lumera-700/opmi-lumera-700_user-manual_3357350148.webp)
Preparations for use
OPMI LUMERA® 700
Version 7.3
Page 148
G-30-1673-en
Connecting the second light guide to the accessories
Before using the system, check whether the second light guide is connected
to the accessory equipment. If this is not the case, proceed as follows to con-
nect the second light guide:
• Switch off the light source.
• Insert the appropriate end of the light guide into the light guide socket of
the accessory equipment as far as it will go.
Fig. 70: Connecting the light
guide
CAUTION
Risk of injury!
A second light guide, which freely hangs from the surgical microscope, may
cause retinal damage or slight burns to the patient.
• Always turn off the light source for the light guide that is not in use.
• Press the unused light guide into an open position of the cable holder (1)
in such a way that it points away from the patient.
• Remove the protective cap of the unused light guide. This will prevent
melting of the protective cap if the light source is accidentally turned on.
2
1
Summary of Contents for opmi lumera 700
