![background image](http://html1.mh-extra.com/html/zeiss/axiovert-200/axiovert-200_operating-manual_3384802081.webp)
OPERATION
Axiovert 200
Axiovert 200 M
Carl Zeiss
B 40-080 e 03/01
3-21
LEFT / RIGHT key for the motorized switching of the Sideport turret
(3-13/
13
)
−
Key to switch the beam splitting ratio for Sideport (doc) right, Sideport (doc) left and VIS (visual
observation through the binocular).
−
Five motorized configurations are possible:
LSM connector SP L and Sideport 60 R
LSM connector BP and Sideport 60 L
LSM connector BP and FCS connector SPL
Safety device LSM / PASCAL
Change to beam path mot. LSM
−
Key pressed briefly:
current position is shown in the LCD display for 4 s (or until the next press
of the key);
without LCD display, the position is approached immediately
key pressed again:
target position is displayed and approached
−
The set beam path is displayed depending on the VIS / Frontport / Baseport setting, i.e. the actual
intensities at the ports are displayed (in %).
Key for the motorized switching of the VIS / Frontport / Baseport slider
(3-13/
14
)
−
Key to switch the beam path between Frontport (FP), Baseport (BP) and VIS (visual observation
through the binocular).
−
The display in the LCD display depends on the position of the Sideport turret.
−
The following is displayed: Binocular, Baseport, Sideport
−
Empty positions are not approached or displayed unless a different setting has been made in the
AXIOSET software program.
FCT key
(3-13/
15
)
−
The AXIOSET software program permits any required CAN/SUB components to be assigned to this
key.
−
Unless the key has been assigned otherwise, the instrument is brought to a basic position (Home or
Default position) after activation.
Basic position:
Optovar 1x (pos 1)
HAL = 3 V
SP 100 % VIS (pos 1)
BP 100 % VIS (pos 2)
condenser aperture fully opened
condenser turret BF (pos 1)
reflector turret on transmission
FL shutter closed
Key "Set LM" (
3-13
/18)
−
briefly pressed:
Light Manager values are saved
pressed long (> 2 s):
activation of Set mode
Summary of Contents for Axiovert 200
