OPERATION
Axiovert 200
Axiovert 200
Carl Zeiss
B 40-080 e 03/01
3-7
Nosepiece with objectives
(3-1/
2
)
−
6-position nosepiece H, DIC (3-2/
1
) with
compartments for DIC slider (3-2/
2
) in all
objective positions.
−
Fast change of objectives through rotation of
the nosepiece via the setting ring (3-2/
4
).
When the heating stage is used, the
nosepiece must first be moved to the
lowest position via the focusing drive
before a new objective is swung in,
since otherwise collision between the
objective and the heating stage might
occur.
Compartment for analyzer slider
(3-1/
3
and
3-2/
3
)
−
For fixed analyzer slider with two dia. 32 mm
filter positions, or analyzer slider
±
30° for DIC.
Drive controls for XY-adjustment of the mechanical stage or the object guide if specimen stage
250x230
(3-1/
4
)
is attached.
−
Upper drive knob:
adjustment in Y direction.
−
Lower drive knob:
adjustment in X direction.
Setting wheel for Optovar turret
(3-1/
6
)
−
Maximum of 3 switching positions with:
tube lens 1x;
optovar lens 1.6x;
optovar lens 2.5x
−
In the case of equipment with less than 3 lenses, the empty positions are blocked.
Fig. 3-2
Nosepiece with mounts for DIC
slider
Summary of Contents for Axiovert 200
