START-UP
Axiovert 200
Illuminator N HBO 103
Carl Zeiss
B 40-080 e 03/01
2-27
2.13.4
Fine adjustment of illuminator
N HBO 103 using the adjusting aid
Attach illuminator N HBO 103 to the microscope
stand, tighten the clamping screw, and switch on
the illuminator.
•
Pull out adjusting aid (2-37/
7
) from the
incident-light tube. The brighter focal spot of
the HBO 103 W/2 lamp and its slightly darker
reflector image become visible in the black glass
window of the adjusting aid.
•
Use knurled knob (2-37/
6
) to focus on the
brighter focal spot via collector adjustment.
•
Apply SW 3 ball-headed screwdriver on
adjusting screw (2-37/
3
) to focus on the slightly
darker, reflected focal spot of the lamp.
•
If required, set knurled knob (2-37/
6
) and
adjusting screw (2-37/
3
) repeatedly until both
focal spots have the same dimension.
•
Use adjusting screws (2-37/
4
and
5
) to adjust
the brighter focal spot in the adjusting circle,
e.g. on the left side, in accordance with the
focal spot image (2-37/
8
).
•
Use adjusting screws (2-37/
1
and
2
) marked with a dot to adjust the darker focal spot in the adjusting
circle, e.g. on the right side, in accordance with the focal spot image.
•
Push in adjusting aid again.
☞
The two focal spots of the HBO 103 W/2 lamp must
not
superimpose in the adjusting circle of
the adjusting aid!
If required, the above settings for fine adjustment of the N HBO 103 illuminator can be
performed repeatedly.
Fig. 2-37
Adjusting aid and illuminator N
HBO 103
Summary of Contents for Axiovert 200
