INTRODUCTION
Carl Zeiss
Notes on instrument safety
Axiovert 200
0-8
B 40-080 e 03/01
The Axiovert 200 microscopes, including original accessories, may only be used for the microscope
techniques described in this manual.
Particular attention must be paid to the following notes:
The manufacturer cannot assume any liability for any other applications, possibly also involving
individual modules or single parts. This also applies to all service or repair work which is not
carried out by authorized service personnel. Furthermore, this forfeits all the claims against
warranty
The power plug must be inserted in a socket featuring a grounding (earth) contact. The
grounding effect must not be made ineffective by an extension cable which does not have a
protective ground wire.
If it is established that the protection measures are no longer effective, the instrument must be
switched off and safeguarded against inadvertent operation. For repair of the instrument,
contact the Carl Zeiss microscope service in Germany (see page 4-6) or your local Carl Zeiss
agency.
The Axiovert 200 microscopes are not equipped with any special devices for protection from
substances which are corrosive, toxic, radioactive or otherwise hazardous to health. All the
legal regulations for accident prevention, particularly those in the respective countries, must be
observed when handling such substances.
Before switching on the power unit for the HBO 50/100, check whether it is suitable for the
line voltage present.
Always disconnect the instrument from the line before opening the instrument and before
changing the fuses.
Make sure to use only fuses of the rated power required. The use of makeshift fuses and the
short-circuiting of the fuse holders are not permitted.
Summary of Contents for Axiovert 200
