START-UP
Carl Zeiss
Illuminator N HBO 103
Axiovert 200
2-26
B 40-080 e 03/01
☞
If required, the above settings for coarse adjustment of the N HBO 103 illuminator can be
performed repeatedly. During coarse adjustment of the focal spots, adjusting screws (2-32/
1
and
2
) marked red must not be changed, since they influence the reflector setting in the HBO
103 illuminator.
2.13.3
Attachment of illuminator N
HBO 103
•
Remove cover from reflected-light tube
(2-35/
1
).
•
Insert dovetail of lamp housing in reflected-light
tube (2-35/
1
) on the instrument rear and use
SW 3 ball-headed screwdriver to tighten
clamping screw (2-35/
2
).
•
Insert multi-pin plug of the N
HBO
103
illuminator (2-35/
4
) into the instrument socket
(2-36/
2
) of the power supply ebq 100 dc and
secure it with captive coupling ring (if not
already done so after adjustment).
•
Connect the line cable to the line socket
(2-36/
1
) of power supply ebq 100 dc first and
then to the line (if not already done so after
adjustment).
Fig. 2-35
Attachment of illuminator N
HBO 103
Fig. 2-36
Power supply ebq 100 dc
Summary of Contents for Axiovert 200
