![background image](http://html.mh-extra.com/html/yokogawa/av550g/av550g_user-manual_911433151.webp)
< 10. Other Functions >
10-12
IM 11M12D01-01E
10.4.2 Procedure for Performing an Indication Check
You can perform two-point Span and Zero (Gas) Indication Checks, you can include a third gas and
perform a three-point indication check, or you can check just one of the three points.
<Setting Procedure>
Select [Points] on the [Indication check setup] display. A dropdown menu opens, allowing you to select
the desired indication check point(s) from: [Span-Zero], [Span], [Zero], [Span-Zero-Third] or [Third]
(Figure 10.10).
Enter
F10-10E.ai
Points: Semi-auto-Third
Timing
Indication check setup
Mode: Semi-auto
Span-Zero
Span
Zero
Span-Zero-Third
Third
Figure 10.10 Indication Check Point Selection
10.4.3 Setting Contacts for Operating Third Check Gas Solenoid Valve
When performing a three-point Semi-auto or Auto Indication Check, you need to allocate a contact to
operate the third check gas solenoid valve.
<Setting Procedure>
1) On the basic panel display, if you touch the Setup key, the [Execution/Setup] display appears.
Select [Commissioning] then [Contact setup].
2) Select a contact (Ex. [Output contact 3]) that is not yet allocated to other functions, and select
[Others].
3) Select [Third gas] and turn it [ON] .
Enter
Warm up:
OFF
Range change:
OFF
Maintenance:
OFF
Calibration:
OFF
Indication check: OFF
Blow back:
OFF
Third gas:
OFF
F10-11E.ai
ON
Contact3
Others
OFF
Figure 10.11 Allocating Third Check Gas Contact
Summary of Contents for av550g
