![background image](http://html.mh-extra.com/html/yokogawa/av550g/av550g_user-manual_911433015.webp)
< 1. Overview >
1-2
IM 11M12D01-01E
F1-1E.ai
ZR22G Detector (max. 8 detectors)
Output signal cable (Cell output, thermocouple output, cold contact compensation)
(0.75mm
2
, 6-core shield cable)
Heater power
(1.25mm
2
, 2-core shield cable)
Analog outputs :
Averaged and individual outputs
4 to 20 mA DC
Digital output
Power supply :
100 / 115 V AC, 230V AC
50 / 60 Hz±5%
Stop
Valve
or
Check
Valve
Reference gas
Flowmeter
Air set
Needle
Valve
Calibration gas
Zero gas cylinder
Pressure
reducing
valve
Calibration gas unit case
Span gas (Calibration gas unit same as for zero gas)
Instrument air
Model ZA8F
flow setting unit
Model AV550G Averaging Converter
Contact input
Contact output
Figure 1.1 Typical System Configuration Using Flow Setting Units for Manual Calibration
1.1.2 System Configuration to Perform Automatic Calibration
A typical system configuration to perform automatic calibration is illustrated in Figure 1.2. The system
consists of detectors, an averaging converter, solenoid valves, needle valves for flow control, and a
float-type flowmeter.
Averaging Converter (AV550G)
Heater power
Output signal cable
Calibration
contact outputs
Contact
output
Span gas cylinder
(Instrument air)
Zero gas cylinder
Flowmeter
Solenoid valve
Needle valve
Air set
Pressure reducing valve
Needle valve
Flowmeter
Reference
gas line
Calibration gas line
Solenoid valve
Detector
Power supply
Instrument air
Contact input
Contact output
Analog outputs:
Averaged and individual outputs
Digital output
Stop valve
F1-2E.ai
Figure 1.2 Typical System Configuration to Perform Automatic Calibration
Summary of Contents for av550g
