![background image](http://html.mh-extra.com/html/yokogawa/av550g/av550g_user-manual_911433113.webp)
<8. Detailed Data Setting>
8-4
IM 11M12D01-01E
3) (Under) Calibration
For Manual Calibration
“Under calibration” is the time that starts when you move to the [Manual cal.] display (Figure 8.4) from
the Calibration display, lasts while you are operating keys for performing calibration manually, and
ends when you press the End key and after a preset hold time has elapsed.
For Semi-Automatic Calibration
When calibration is started from the Calibration display, “under calibration” is the time that starts when
you touch the Enter key on the [Semi-auto cal.] display with Start calibration selected (Figure 8.5),
lasts while calibration is being performed, and ends after a preset hold time has elapsed.
When calibration is started by a contact input, calibration is performed for all installed channels.
“Under calibration” is the time that starts when calibration is started by the contact input, lasts while
calibration is being performed sequentially, and ends after a preset hold time for the last calibrated
channel has elapsed.
Enter
F8-4E.ai
Ch1
Manual cal.
Open span gas valve.
Set flow span gas to
600ml/min.
Valve opened
Cancel calibration
Enter
F8-5E.ai
Ch1
Semi-auto cal.
Check settings
Span gas conc: 2 1 . 0 0 %
Zero gas conc: 0 . 9 8 %
Cal. time: 2 min 0 0 s
Points: Span-Zero
Go to setup to change value.
Start calibration
Cancel calibration
Figure 8.4 Manual Calibration display
Figure 8.5 Semi-Automatic Calibration display
For Automatic Calibration
“Under calibration” is the time that starts when calibration is started at a preset timing, lasts while
calibration is being performed sequentially, and ends after a preset hold time for the last calibrated
channel has elapsed.
4) Under Indication Check
For Manual Indication Check
“Under indication check” is the time that starts when you move to the [Manual ind. check] display
(Figure 8.6) from the Indication check display, lasts you operating keys for performing indication check
manually, and ends when a preset hold time has elapsed.
For Semi-Automatic Indication Check
When indication check is started from the [Indication check] display, “under indication check” is the
time that starts when you touch the Enter key on the [Semi-auto ind. chk] display with Start ind. check
selected (Figure 8.7), lasts while indication check is being performed, and ends after a preset hold
time has elapsed.
When indication check is started by a contact input, indication check is performed for all installed
channels. “Under indication check” is the time that starts when indication check is started by the
contact input, lasts while indication check is being performed sequentially, and ends after preset hold
time for the last checked channel has elapsed.
Summary of Contents for av550g
