manualshive.com logo in svg

YOKOGAWA AQ6373, User Manual, Page: 78 / 358

Share
Download
YOKOGAWA AQ6373 User Manual Download Page 78

5-10

IM AQ6373-01EN

Setting the Sub Scale to Linear Display

1.

  Press LEVEL. The soft key menu for vertical axis settings appears. 

2.

  Press the MORE 1/2 soft key. The soft key menu for the sub scale appears. 

3.

  Press the SUB LIN soft key. The sub scale is displayed with the currently specified 

linear scale values. At the same time, the linear scale value setting screen is 
displayed. 

4.

  Enter a value using the rotary knob, arrow keys, or numeric key pad. 

5.

  Press ENTER. 

Setting the Sub Scale Units to %/D

1.

  Press LEVEL. 

2.

  Press the MORE 1/2 soft key. 

3.

  Press the SUB SCALE **.*%/D soft key. The instruments of the sub scale display 

change to %. At the same time, the log scale value setting screen is displayed. 

4.

  Enter a value using the rotary knob, arrow keys, or numeric key pad. 

5.

  Press ENTER. 

Setting the Sub Scale Lower-End Value

1.

  Press LEVEL. 

2.

  Press the MORE 1/2 soft key. 

3.

  Press the SCALE MIN soft key. The sub scale lower end value setting screen is 

displayed. 

4.

  Enter a value using the rotary knob, arrow keys, or numeric key pad. 

5.

  Press ENTER. 

5.3  Sub Scale

Summary of Contents for AQ6373







































































































































































































































































































































































Reviews:

No comments