YOKOGAWA AQ6373 User Manual Download Page 227

Page: 227 / 358

8-23

IM AQ6373-01EN

Saving/Loading Data

App

Index

Selecting a save destination

Press the

MEMORY

soft key, then specify a save destination of

INT

(internal

memory) or

EXT

(USB storage medium).

Entering a file name (when saving to an arbitrary file name)

If a file name is not specified, it is automatically set to AXXXX.CSV (where XXXX is a

serial number starting from 0000).

Using the

rotary knob

, move the cursor to the row on the file list that displays

NEW FILE.

Press the

FILE NAME

soft key. The text input window and corresponding soft key

menu appear.

Enter a file name according to the instructions in section 4.3.

Press the

DONE

soft key. The file name is entered, and you are returned to the

previous screen.

8.4 Saving/Loading Displayed Data(All Trace)

Summary of Contents for AQ6373







































































































































































































































































































































































Search results

Summary of Contents for AQ6373

Reviews:

YOKOGAWA AQ6373, User Manual, Page: 227 / 358

Search results

Summary of Contents for AQ6373

Reviews: