11-3
IM AQ6373-01EN
Specifications
1
2
3
4
5
6
7
8
9
10
11
App
Index
Item
Specifications
Immunity
Conforming standards
EN61326-1
Table 2 (For use in industrial locations)
Effect in immunity environment
Wavelength measurement sensitivity: Within ±0.1 nm
Cable conditions
Same as above emission cable conditions.
1: Horizontal axis scale: In wavelength display mode
2: After user wavelength calibration with a 633 nm HeNe laser
3: The actual power value of the wavelength resolution differs depending on the measured wavelength. The widest is
approximately 8 nm, when set to 10 nm.
4: Vertical scale: absolute value level display mode
5: Typical value. AVR: 10 times
6: High dynamic range mode: OFF, pulse light measurement mode: OFF, no. of sampling points: 1001, averaging count: 1, and
span of 100 nm or less (excludes the wavelength at which the order of diffraction switches, and the wavelength at which the
optical filter switches).
7: Note that this excludes the protector and handle
8: The LDC display may contain defective pixels (always ON or always OFF).
(0.002% or fewer of all pixels including RGB). Does not indicate a general malfunction.
9: Pollution degree refers to the degree of adherence by a solid, liquid, or vapor that reduces the withstand voltage or surface
resistance factor. Pollution degree 1 applies to closed atmospheres (no pollution, or only dry, non-conductive pollution).
Pollution degree 2 applies to normal indoor atmospheres (with only non-conductive pollution).
10: Use a cable of 3 m in length or less.
11: Use a cable of 30 m in length or less.
11.1 Specifications