Home
/
YOKOGAWA
/
AQ6373
/
User Manual

YOKOGAWA AQ6373, User Manual, Page: 232 / 358

Share

Page: 232 / 358

YOKOGAWA AQ6373 User Manual Download Page 232

8-28

IM AQ6373-01EN

8.5 Saving/Loading Setting Data

Procedure

The measurement conditions set on the instrument and soft key set statuses are saved
in binary format.

CAUTION

Do not remove the USB storage medium or turn the power OFF while the USB
storage medium access indicator is blinking. This can damage the data on the
medium or the device itself. Also, always place a USB storage medium in the
removable state (following the procedure in section 8.1) before removing it.

Setting the Type of the File to Be Saved to SETTING

1.

Press

FILE

.

2.

Press the

ITEM SELECT

soft key. The soft key menu switches.

3.

Press the

SETTING

soft key. SETTING is selected, and the screen returns to the

previous stage.

4.

Press the

WRITE

soft key. The file list is displayed.

«
...
230
231
232
233
234
...
»

Summary of Contents for AQ6373







































































































































































































































































































































































Reviews:

No comments