manualshive.com logo in svg

YOKOGAWA AQ6373, User Manual, Page: 75 / 358

Share
Download
YOKOGAWA AQ6373 User Manual Download Page 75

5-7

IM AQ6373-01EN

Mesurement

1

2

3

4

5

6

7

8

9

10

11

App

Index

Absolute power display: measurement of light sources with narrow spectrum widths, 
such as gas lasers or laser diodes.
Power density display: measurement of light sources with wide spectrum widths, such as 
natural light or LEDs.

If the subtraction function between traces is used for such cases as A-B(A/B)→C or 
B-A(B/A)→C, results will be the same whether the absolute power display or the power 
density display is used. 
Since the power measurement function performs different calculations according to the 
level axis display, correct results will be available whichever display is employed.

Note

Specifications such as level accuracy, measurement level range, and level linearity of the 
instrument are provided for the absolute power display. 

5.2  Horizontal/Vertical Axis Settings

Summary of Contents for AQ6373







































































































































































































































































































































































Reviews:

No comments