manualshive.com logo in svg

YOKOGAWA AQ6373, User Manual, Page: 295 / 358

Share
Download
YOKOGAWA AQ6373 User Manual Download Page 295

10-8

IM AQ6373-01EN

10.7  Daily Maintenance

Cleaning the Exterior of the Instrument

When removing dirt from the case or operation panel, remove the power cord from the 
power outlet, then wipe gently with a clean, dry cloth. Do not use volatile chemicals since 
this might cause discoloring and deformation. 

Cleaning the output connector of the alignment light source

 

WARNING

The instrument has a built-in reference light source for alignment adjustments, and 
infrared light is always being output from the optical output connector. Never look 
into the optical output connector. Infrared light entering the eyes can cause severe 
injury and loss of vision.

Cleaning the Optical Connector Connection Section 

It is recommended that the following cleaner be used for this procedure.
  Recommended cleaner:  “Cletop Stick Type” (NTT-ME)
Open the optical connector cover at the front of the unit. Use the cleaner to clean the 
optical connector connection section. Insert the cleaner straight into the optical connector 
connection section and rotate it.

 

 

Cleaner (stick type) 

 

Optical Connector Connection Section

 

CAUTION

Wiping with a soiled cleaner can damage the optical outputs. 

Summary of Contents for AQ6373







































































































































































































































































































































































Reviews:

No comments