YOKOGAWA AQ6373 User Manual Download Page 77

Page: 77 / 358

5-9

IM AQ6373-01EN

Mesurement

App

Index

Log Display of the Sub Scale

Press LEVEL. The soft key menu for vertical axis settings appears.

Press the MORE 1/2 soft key. The soft key menu for the sub scale appears.

Press the SUB LOG soft key. The sub scale is displayed with the currently

specified log scale values. At the same time, the log scale value setting screen is
displayed.

Enter a value using the rotary knob, arrow keys, or numeric key pad.

Press ENTER.

Setting the Sub Scale Units to dB/km

Press LEVEL.

Press the MORE 1/2 soft key.

Press the SUB SCALE **.*dB/km soft key. The instruments of the sub scale

change to dB/km. At the same time, the log scale value setting screen is
displayed.

Enter a value using the rotary knob, arrow keys, or numeric key pad.

Press ENTER.

When displaying the loss characteristics of the optical fiber per unit of length (km)

Continuing on from step 5, press the LENGTH soft key. The optical fiber length

entry screen appears.

Enter a value using the rotary knob, arrow keys, or numeric key pad.

Press ENTER.

Setting the Sub Scale Offset Value

Press LEVEL.

Press the MORE 1/2 soft key.

Press the OFFSET LEVEL soft key. The offset value (sub scale REF value)

setting screen is displayed.

Enter a value using the rotary knob, arrow keys, or numeric key pad.

Press ENTER.

5.3 Sub Scale

Summary of Contents for AQ6373







































































































































































































































































































































































Search results

Summary of Contents for AQ6373

Reviews:

YOKOGAWA AQ6373, User Manual, Page: 77 / 358

Search results

Summary of Contents for AQ6373

Reviews: