YOKOGAWA AQ6373 User Manual Download Page 201

Page: 201 / 358

7-42

IM AQ6373-01EN

Analysis in the Zoom Area

Power Measurement in the Zoom Area

Optical power can be measured by integrating the measured waveform level
measurements in the zoom area.

Zoom in on the measured waveform. Set the range you want to measure to the

display scale. For the procedure on zooming in on the waveform, see section 6.1,
“Zooming In/Out on a Waveform.”

Press the

MARKER

switch. The soft key menu regarding the markers appears.

Press the

MORE 1/3

MORE 2/3

soft keys in succession.

Press the

SEARCH/ANA ZOOM AREA

soft key, and select ON.

Press

ANALYSIS

. The soft key menu for analyzing measured waveforms

appears.

Press the

ANALYSIS 1

soft key. The analysis function selection menu is

displayed.

Press the

POWER

soft key. Analysis is performed between display scales, and

the results are displayed in the data area.

Data area

Note

• When the zoom area search function is enabled,

is displayed in inverse video.

• If the SEARCH/ANA ZOOM AREA key is OFF, analysis is performed over the entire range of

the measurement scale.

• For details on the POWER analysis function, see appendix 3, “Details of Analysis

Functions.”

7.12 Specifying an Analysis Range

Summary of Contents for AQ6373







































































































































































































































































































































































Search results

Summary of Contents for AQ6373

Reviews:

YOKOGAWA AQ6373, User Manual, Page: 201 / 358

Search results

Summary of Contents for AQ6373

Reviews: